Product ID:27-200 WALLHYDE S.G. DEEPTONE BASE
MSDS Date:09/13/1991
FSC:8010
NIIN:00-700-5952
MSDS Number: BVTYT

PPG INDUSTRIES INC (WAS PTTTSBURGH PLATE GLASS CO)

ONE PPG PLACE
PITTSBURGH, PA 15272-0001
US

Emergency Phone: 304-843-1300

Info Phone: 800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3 TOTAL DUST

ACGIH TLV: 10 MG/M3

HYDROTREATED HEAVY NAPHTHA

CAS: 64742-48-9

Fraction By Weight: 35-40%

FILM,FORMERS,RESINS & ADDITIVES

Fraction By Weight: 25-30%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL OR FATAL IF INGESTED.
CONTACT MAY CAUSE SKIN & EYE IRRITATION. INHALATION MAY CAUSE
RESPIRATORY TRACT IRRITATION; MAY BE HARMFUL. CHRONIC: NONE
SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:INHALED: COUGHING, SNEEZING, WHEEZING, SORE
THROAT, DIZZINESS, DROWSINESS, HEADACHE, NAUSEA, VOMITING. EYES:
REDNESS, BLURRED VISION, BURNING SENSATION, VISUAL DISTURBANCES.
SKIN: REDNESS, DRYNESS, CR ACKING, SWELLING, ITCHING, DISCOMFORT.
INGESTED: NAUSEA, VOMITING, DIARRHEA,
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGESTED-DO NOT INDUCE VOMITING! EYES-FLUSH WITH LOTS OF
WATER FOR AT LEAST 15 MINUTES. SKIN-FLUSH WITH LOTS OF WATER
FOLLOWED BY WASHING WITH SOAP & WATER. INHALED-REMOVE TO FRESH AIR.
APPLY ARTIFICI AL RESPIRATION OR OTHER SUPPORT MEASURES AS
REQUIRED. OTHER-IF INGESTED, OR IF SYMPTOMS OCCURS, CONTACT A
POISON CONTROL CENTER, EMERGECY ROOM OR PHYSICIAN IMMEDIATELY.

Flash Point Method:PMCC
Flash Point:120F,49C
Lower Limits:0.7
Extinguishing Media:USE CARBON DIOXIDE,FOAM (AFFF),OR DRY CHEMICAL.USE
CLASS B AGENTS/FIRE EXTINGUISHERS.WATER MAY BE INEFFECTIVE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE IF EXPOSED TO
FIRE. COMBUSTION OR HEAT OF FIRE MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS AND VAPORS.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
WITH PROPER PROTECTIVE EQUIPMENT/CLOTHING ALLOWED IN SPILL AREA.
REMOVE ALL SOURCES OF IGNITION. TAKE UP WITH INERT ABSORBENT AND
PLACE IN A CONTAINER FOR D ISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE IN A
BUILDING DESIGNED FOR NFPA CLASS II COMBUSTIBLE MATERIALS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED & BONDED WHEN
POURING/TRANSFERRING. THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
SYSTEM; TAKE INTO ACCOUNT OTHER PART(S) OF THE SYSTEM (READ THEIR
MSDS).

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR EMERGENCY OCCURS; USE NIOSH/MSHA APPROVED RESPIRATOR OR SUPPLIED
AIR RESPIRATOR OR SCBA, AS REQUIRED. USE IAW 29 CFR 1910.134 AND
MANUFACTURER'S RECO MMENDATIONS.
Ventilation:EXPLOSION-PROOF LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST
ACCEPTABLE IF THE EXPOSURE IS MAINTAINED BELOW TLV.
Protective Gloves:NEOPRENE, RUBBER, PVA.
Eye Protection:PAINT GOGGLES/SAFETY GLASSES AS REQUIRED
Other Protective Equipment:INDUSTRIAL-TYPE WORK CLOTHING, HAT AND APRON
AS REQUIRED.
Work Hygienic Practices:USE WITH ADEQUATE VENTILATION. AVOID BREATHING
VAPOR/SPRAY MIST. AVOID CONTACT WITH SKIN & EYES. WASH HANDS AFTER
USE.
Supplemental Safety and Health
MSDS ENTERED BY DLA-HMIS UNDER PROJECT FOR GSA.

HCC:F4
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:0.7 MM HG
Vapor Density:>1
Spec Gravity:1.1
Evaporation Rate & Reference:6 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS LIQUID; SOLVENT ODOR.
Percent Volatiles by Volume:59.6

Stability Indicator/Materials to Avoid:YES
STRONG MINERAL ACIDS, STRONG ALKALIS, STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS. EMPTY CONTAINERS SHOULD BE
RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE MANAGEMENT
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.